This parts list for BME 101/L (Applied Circuits for Bioengineers) Spring 2014, is based on the Winter 2014 list and the parts orders for that course. Prices are based on ordering enough parts for 40 kits, but do not include tax and shipping (see last year’s list for the prices last year including tax and shipping). Some parts based on buying for 50 (where that was a big price break).
Item | Vendor | Qty | Extended price |
---|---|---|---|
Tools | |||
Solderless Breadboard | MeerkatSystems | 1 | $4.58 |
Wire Strippers | Sparkfun | 1 | $4.46 |
Solder Vacuum | Sparkfun | 1 | $3.56 |
Needle Nose Pliers | Harbor Freight | 1 | $2.19 |
Diagonal Cutters | Harbor Freight | 1 | $1.69 |
student Celsius thermometer | Lab and Science | 1 | $1.90 |
screwdriver set | Amazon | 1 | $3.73 |
Subtotal | $22.11 | ||
Parts | |||
hysteresis oscillator board (1.6mm green, custom PC, order 20 boards and cut) | ITEADStudio | 1 | $0.50 |
instrumentation amp protoboard (1.6mm green, custom PC order 100 boards) | ITEADStudio | 2 | $1.41 |
2-1/2″ x 4″ Shielded Speaker | Parts Express | 1 | $0.78 |
Hook & Loop 6″ Cable Ties 6-Pack (omit?) | Parts Express | 1 | $0.60 |
alligator clips or with colored insulators (preferred) | Mouser or Parts Express | 4 | $1.00/$1.20 |
1280 piece resistor assortment | Amazon | 1 | $11.65 |
EKG electrodes (repackage into Ziploc quart size 10/student) | Amazon | 10 | $2.20 |
3/16″ air-line tubing (cut to length) | Amazon | 2 feet | $0.44 |
250 ceramic capacitors | ITEADStudio | 1 | $4.32 |
electrolytic capacitors repackage 1 of each size into small zipseal #1 | ITEADStudio | 12 | $0.54 |
Subtotal | $23.68 | ||
Parts to package in DIP rail | |||
MCP6004 quad op amp | DigiKey | 2 | $0.72 |
INA126PA instrumentation amp | DigiKey | 2 | $5.36 |
74HC14N Schmitt trigger hex inverter | DigiKey | 1 | $0.34 |
LM2903 dual comparator | DigiKey | 1 | $0.24 |
Subtotal | $6.66 | ||
Parts to package in small zipseal #2 | |||
24 gauge fine silver wire (cut) | Fusion Beads | 1 foot | $0.82 |
double-ended male headers (split into 20-pin lengths) | ITEADStudio | 20 pins | $0.14 |
electret microphone CMA-4544PF-W | DigiKey | 1 | $0.75 |
10kΩ thermistor 1% epoxy NTCLE413E2103F520L | DigiKey | 1 | $0.77 |
4-long 0.1″ screw terminal OSTVN04A150 (was 282834-4) | DigiKey | 5 | $3.74 |
4.7µF 16v ceramic capacitor 10% FK26X7R1C475K | DigiKey | 6 | $1.07 |
AOI518 (was NTD5867NL-1G nFET 18A not in stock) | DigiKey | 1 | $0.40 |
IRFU9024NPBF pFET 11A (was NTD2955-1G not in stock) | DigiKey | 1 | $0.48 |
10KΩ multi-turn trim pot 1-1623849-0 | DigiKey | 1 | $0.77 |
phototransistor 3mm 940nm IR NPN WP3DP3BT | DigiKey | 1 | $0.16 |
photodiode 3mm clear PD204-6C (added 2014 Feb 13) | DigiKey | 1 | $0.34 |
LED red diffuse 3mm 625nm WP710A10ID | DigiKey | 1 | $0.08 |
LED IR emitter 5mm 950nm SFH 4512 | DigiKey | 1 | $0.20 |
DigiKey | 1 | ||
8×2 gold female header for KL25Z | DigiKey | 2 | $1.58 |
6×2 gold female header for KL25Z | DigiKey | 1 | $0.70 |
Subtotal | $13.25 | ||
Microcontroller | |||
Freedom KL25Z | Digikey | 1 | $12.95 |
USB A to USB mini cable | ITEADstudio | 1 | $0.80 |
Subtotal | $13.67 | ||
Packaging | |||
Ziploc 2-gallon freezer bag to hold everything | Amazon | 1 | $0.40 |
Ziploc quart freezer bags for EKG electrodes (could use sandwich bag, if sheets of electrodes cut in 2 parts) |
Amazon | 1 | $0.11 |
2″x3″ zip-seal bags for electrolytic capacitors and discrete semiconductors | Amazon | 2 | $0.02 |
used DIP rail (packaging) cut into 3 7-inch pieces | Jameco | 7″ | $0.08 |
DIP rail plugs | Jameco | 2 | $0.14 |
Subtotal | $0.75 | ||
Total | $80.08 |
[…] don’t know what procedure to tell the students to follow to get their parts kits. Last year, I bought the parts myself and sold the kits to the students, but this year there is a […]
Pingback by Panicking about circuits class | Gas station without pumps — 2014 March 30 @ 22:08 |